About Us













Customer List

Contact Us





Surface Protection Solutions



















Combining advanced polyurethane, epoxy and acrylic technologies for better performance!







Material Safety Datasheet


Water-based Coatings





► SECTION l - Manufacturer’s Name and Address


Industrial Products Manufacturing Company

108/109, Parmar Chambers

3/4, B. J. Road,

Pune 411 001, India

Tel: 020-26129521




SECTION 2 - Composition/Ingredients





Aliphatic urethane



Specialty polymers






Polyglycol Ether



Xylene (Mixed Isomers)








► SECTION 3 – Hazard Identification


·       Route of Entry: Inhalation: Yes (accidental only), Skin: Yes (improper handling), Ingestion: Yes (accidental only)

·       Health Hazard (acute and chronic): Non hazardous (see section 15)

·       Signs and Symptoms of Exposure: Direct contact with skin and eyes may cause irritation.                   

        Inhalation and ingestion can cause vomiting, nausea, headache, dizziness, drowsiness.

·       Medical Conditions Generally Aggravated by Exposure: data not available



► SECTION 4 – First Aid Measures


·       Skin Contact: Immediately flush with plenty of running water and soap. Take away contaminated clothing.

·       Eyes Contact: Immediately flush with plenty of running water for at least 15 minutes.

·       Inhalation: Move quickly to a fresh air area. If necessary, get medical care.

·       Ingestion: Do not induce vomiting. Call a physician.



► SECTION 5 - Fire and Explosion Hazard Data


·       Flammable: No    Auto ignition: No

·       Flash Point: N.A.; Flammable Limits: N.A.; LEL: N.A.; UEL: N.A.

·       Extinguishing Media: Foam, Carbon Dioxide, Dry Chemical

·       Hazardous Combustion Products: Oxides of carbon and nitrogen

·       Special Fire Fighting Procedures: Use self-contained breathing apparatus, protective clothing. Avoid human exposure to smoke, fumes or products of combustion.

·       Unusual Fire and Explosion Hazards: None



► SECTION 6 – Accidental Release Measures


·       Safely gather material in a plastic bag using all handling precautions



► SECTION 7 – Handling and Storage


·       All chemicals require safe handling. Handle with care.

·       Store products in a cool, ventilated area.

·       Keep products away from children at all times.

·       Always keep containers closed before and after the use.



► SECTION 8 – Exposure Control / Control Measures


·       Respiratory Protection: Not needed if handled with care

·       Ventilation: Local Exhaust - May be required in a closed area, Special - None

·       Protective Gloves: PVC or Rubber gloves 

·       Eye Protection: Safety goggles 

·       Other: Wash hands before and after work. No eating drinking or smoking in work place

·       Clothing/Equipment: Protective outfit may be used

·       Work/Hygienic Practices: Follow good practices.



SECTION 9 - Physical/Chemical Characteristics


VOC: ~ 50-75 gm/L  

Specific Gravity: ~1.05    

Appearance: Cloudy/Milky, Odor: Very Slight

Boiling Point: About 212 deg. F  

pH: Alkaline ~ 7-8 - 8.5

Melting Point: N.E.   

Vapor Density (Air=1 ):N.E. 

Vapor Pressure (mm Hg.): N.E.  

Solubility in water: Soluble

Evaporation Rate: Water-based



► SECTION 10 – Stability & Reactivity

  • Stability: Stable in cool dry place at room temperature. Avoid direct sunlight or over heated areas.

  • Incompatibility: Avoid strong acids and oxidizing agents

  • Hazardous Decomposition or Byproducts: Carbon dioxide, Carbon monoxide, irritating fumes (during hazardous fire/burning, irritating fumes can come from polyurethane chain.  When polyurethane burns, toxic compounds include cyanates, small quantity of HCN and oxides of nitrogen…  This is well-known information and it applies to all polyurethane based products/compounds/formulations.)

  • Hazardous Polymerization: Will not occur.


► SECTION 11 – Toxicological Information

  • No toxicology tests are available


► SECTION 12 – Ecological Information

  • No aquatic toxicity tests are available


► SECTION 13 – Disposal Considerations

  • Dispose off in accordance with the local, state & central government environmental control regulations.


► SECTION 14 – Transport Information

  • Not a regulated product, Harmonized Tariff Code:  N.D.


► SECTION 15 – Regulatory Information

  • Material is not regulated  | WHMIS: Does not contain a controlled material

  • OSHA: Non Hazardous | SERA Components: None


► SECTION 16 – Other Information


·       N.A. = Not Applicable, OSHA = Occupational Safety & Health Adm., TLV = Threshold Limit Value

·       PEL = Permissible Exposure Limit, N.E. = Not Established, N.D. = Nor Determined


Information given above is to our knowledge true and accurate. Since the conditions of use are beyond our control, Innovative Products Methods Concepts disclaims any liability arising in connection with the use or handling of our products and information contained in our data/spec. sheet.



















































Industrial Products Mfg. Company 108-109 Parmar Chambers, 3/4 B. J. Road, Pune 411001 India

www.IPMCIndia.com   ●   Tel: 91-020-26129521  ●   Fax: 91-20-26124362

Since 1981