Protecto-SureGard™
Multi-purpose
Clear Protective Coating
(for vertical and horizontal surfaces)
►
Description
Protecto-SureGard is a long-lasting, eco-friendly, water-based,
ready-to-use, modified Polyurethane coating which
forms a transparent, moisture resistant, abrasion resistant,
anti-fungal, anti-bacterial, UV resistant, protective barrier film
when applied over a wide range of surfaces such as stone, concrete
or brick facades, painted or wallpapered walls, gypsum board
partitions, marble/granite counter-tops, glass/plastic/wood
articles, etc. It can be used for outdoor as well as indoor
applications.
Protecto-SureGard keeps the surface looking fresh and new by sealing the
porosity of the surface and guarding it against water ingress,
abrasion and scratches as well as the harmful effects of
environmental pollution. Protecto-SureGard is highly abrasion and scratch
resistant and has very good resistance to fungi and bacteria. It has
good stain resistance and is easy to clean and maintain. Both glossy
and matt finishes are available.
Protecto-SureGard enhances color and appearance of the surface.
►
Uses
Protecto-SureGard coating can be used to protect both vertical and horizontal
surfaces:
Vertical Surfaces:
●
Bricks and stones including marbles and granites
●
Plastered walls
● Painted
exterior/interior walls
● Gypsum
boards
●
Glass/plastic/wood surfaces
●
Laminated surfaces
Horizontal Surfaces:
● PVC
tiles,
ceramic tiles, cement tiles, mosaic tiles
Protecto-SureGard
helps extend the useful life of surface it is applied on.
Examples
of some of the places where Protecto-SureGard can be applied are:
►
Bungalows, Buildings
►
Offices and homes
►
Agricultural warehouses
►
Food processing areas
►
Pharmaceutical workplace
►
Hospitals, clinics and healthcare facilities
|
|
|
|
|
|
|
|
|
Sand
Stone |
Jodhpur
Stone |
Natural or Cast
Stone Wall |
Plastered
Surface |
Brick |
Marble |
Granite |
Textured Surface |
Painted Walls
(Exterior & Interior) |
►
Application
The
surface should be clean and free of all oily impurities and dirt.
Spray or brush on Protecto-SureGard (glossy or matt) over the surface. Avoid
applying excessively. The coating should become dry within 2-3 hours
depending on the ambient temperature and relative humidity.
Apply
more coats as per requirement keeping a gap of 3-4 hours between
coats.
Ø
Porous surfaces would consume more product than smooth and less
porous surfaces.
Ø
It is always a good idea to apply a small test-patch with a brush to
determine the conditions of application (absorption,
spreadability, drying time, etc.)
Ø
On horizontal surface avoid a creating a puddle while applying
Protecto-SureGard
►
Properties
|
|
Colour
|
Milky coating which
becomes
Colourless on drying |
Grades |
Glossy and Matte |
Coverage |
3-12 sq.m/kg depending
on the porosity of the surface |
Drying Time (25°
C) |
2 -3 hours |
Flexibility |
Good |
Abrasion Resistance |
Good |
UV Resistance |
Excellent |
Fungus & Bacteria
Resistance |
Excellent |
►
Storage and Precautions
Protecto-SureGard
should
be
stored
in
a cool
and
dry
area.
It
can
be stored
for
up to 12
months
in
its
original,
unopened
container.
While
handling,
all
contact
with
eyes,
skin,
and
clothes
should
be
avoided.
Implements
used
for
application
of
Protecto-SureGard
should
be
cleaned
with
excess
water.
In case
of
accidental
swallowing,
drink
large
quantities
of
water
and
seek
medical
help.
In
case
of
any
splashing
in
the
eyes,
rinse
with
cold
running
water
for
10-15
minutes.
Protecto-SureGard formulations are subject to
strict quality control, innovations and improvements to comply with
our high standards.
The above information is given on the
basis of our best knowledge and information and is for your guidance
only.
As the condition of application is
beyond our control, no guarantee can be given or implied.
All
Rights Reserved. 1980 - 2013
Last Updated April 2013
|